501+519+522 of Xebex International, Ltd.

MVSS Flammability Tester
Model No.501 Series


Used to test flamambility of interior materials for automobiles, etc.

Model S
- Testing method: MVSS302, ISO 3795
- Sample dimensions: approx. 100 x 355mm
- Power supply: 100V AC, single phase (supplied with a transformer for local voltage)
- Dimensions and weight: 48(W) x 21(D) x 46(H) cm, Net approx. 20kg

Model T
- Same as the above, but with a timer

Catalogue

 
Mini Test Press
No.519 Model "MP" Series


Used as a plastic compression molding and rubber vulcanizing sample press, equipped with a two-speed manual hydraulic cylinder pressure system


MP-S type

- Heating plate: 200 x 200mm or 250 x 250mm
- Platen separation: 100mm max. (75mm with water cooling plate)
- Pressure system: Hydraulic cylinder to be manually operated
- Compression load: 100kN at 30MPa
- Pressure indicator: Analog pressure gauge, Max. scale at 35 Mpa
- Temperature control range: Ambient + 10ﾟC to 300ﾟC or 400ﾟC
- Power supply: 100V AC, 50/60Hz (supplied with a transformer for local voltage)
- Dimensions & weight: 50(W) x 39(D) x 68(H) cm (except a handle), Net about 90kg

MP-2F type, with water cooling plateModel MP-SNL
- 200 x 200mm platen, Max. 300ﾟC
Model MP-SNH
- 200 x 200mm platen, Max. 400ﾟC
Model MP-SCL
- 200 x 200mm platen, Max. 300ﾟC, Removable water cooling plate
Model MP-SCH
- 200 x 200mm platen, Max. 400ﾟC, Removable water cooling plate
Model MP-2F
- 200 x 200mm platen, Max. 300ﾟC, Swing-out water cooling plate
Model MP-2FH
- 200 x 200mm platen, Max. 400ﾟC, Swing-out water cooling plate
Model MP-SC
- 200 x 200mm platen, No heater, Water cooling only
Model MP-WNL
- 250 x 250mm platen, Max. 300ﾟC
Model MP-WNH
- 250 x 250mm platen, Max. 400ﾟC
Model MP-WCL
- 250 x 250mm platen, Max. 300ﾟC, Removable water cooling plate
Model MP-WCH
- 250 x 250mm platen, Max. 400ﾟC, Removable water cooling plate
Model MP-WC
- 250 x 250mm platen, No heater, Water cooling only

Catalogue

 
Melt Indexer
No.522 Model G-01


Used to measure melt flow rate of thermoplastic resins



(Right: with an otional flow-rate device)

- Testing method: ASTM D1238, ISO 1133, JIS K7210/K6760/K6870/K6719/K6758
- Temperature range: 100 to 400 deg.C (standard calibration up to 300 deg.C)
- Temperature accuracy: +/-0.2 deg.C
- Temp. display resolution: 0.1 (or 0.01) deg.C
- Encoder: Accuracy at +/-0.02mm
- Test weight: 0.325kg, 2.16kg (standard) or
1.0, 1.05, 1.2, 3.8, 5.0, 10.0, 12.5 & 21.6 kg (option)
- Display: 3.7'' black & white LCD touch panel, with backlight
- Memory: Test conditions (100), Measurement data (100)
- Piston stopper for preheat: 5, 10, 15 mm
- Orifice releasing system: Releasing from the barrel bottom
- Interface: RS-232C
- Power supply: 100 to 115V or 200 to 230V AC, 50/60Hz, single phase, 600VA
- Dimensions & weight: 400W x 370D x 560H mm, Net 40kg or
400W x 370D x 820H to 945H mm, Net 55kg (with weight lifter)

* Some of Accessories in Option
1) Weight set (for 1.0, 1.05, 1.2, 3.8, 5.0, 10.0, 12.5 & 21.6 kg)
2) Safety cover
3) Flow-rate device (encoder) for Method B
4) Weight lifting device, WLG1
5) Manual cutting device, MCG1
6) Automatic cutting device, ACG1
7) Orifice plug, SP
8) Orifice cleaning tool, YG
9) Data acquisition software, RTO-1
10) Mini thermal printer, BL2-58
11) Thermal printing paper
12) Anti-corrosion model, HP (for piston, barrel and orifice)
13) High temperature model (for 300 to 400 deg.C)

Catalogue