HOME
Electro-chemical Analyzers
Industrial System
Automatic Distilation Tester
Model ADM-2E
High performance distillation tester (Best-selling model in Japan)
Testing standards: ASTM D86 and JIS K2254, K2435 & K2421
<Specifications>
- Temperature range: 0 to 300ﾟC and 0 to 400ﾟC
- Temperature accuracy: 0.1ﾟC (distillation, condenser tube & receiver chamber temp.)
- Distillation rate: 4.5 +/-0.5mL/min. or 9.0 +/-1.0mL/min.
- Data display: LCD, 40 characters x 16 lines, 12 program names, test condition, process monitoring (The condition setting screen for 48 samples are prepared./say, for 48 programs)
- Data output: Thermal graphic printer & RS-232C (for plotter & PC)
- Output: Report form, 1% data, distillation curves (Distillation curves can be drawn on the 1ﾟC scale form.)
- Test end setting: E.P. (end point), CUT (vol., temp., time) or D.P. (dry point)
- With volume check function (V.CHK)
- Dry point detection: Visual (auto-detection is also possible.)
- Loss correction: Drawing or interpolation method (selectable)
- Over dist. Correction: Correction to 100% when distilattion exceeds 100%.
- Barometric correction: Automatic by built-in barometer
- Safety features: Fire detection & extinction mechanism
- Power source: 100V AC, 50/60Hz (Supplied with 220V/100V down transformer)
- Dimensions: 460(W) x 530(D) x 590(H) mm, Net about 65kg
* To be supplied at the state of Complete Ready for Use
ADM-2E_distillation.pdf
Characteristics
Comparison list
Automatic Crude Petroleum Distillation Tester
Model ADM-1CP
High performance crude petroleum distillation tester
Testing standards: JIS K2601
<Specifications>
- Temperature range: 0 to 300ﾟC and 0 to 400ﾟC (thermometer JIS B7410, DIST 7,8)
- Temperature accuracy: 0.1ﾟC (distillation, condenser & chamber temp.)
- Distillation rate: 4.5 +/-0.5mL/min.
- Data display: LCD, 40 characters x 8 lines, 12 program names, test condition, process monitoring
- Data output: Thermal graphic printer (110mm width), distillation status monitor
- Output: Report form, 1% data, distillation curve
- Test termination setting: CUT (vol., temp.) & E.P. (end point) selectable
- With Volume Check function
- With high precision distillation curve to be drawin on the 1deg.C scale
- Safety functions: Fire detection and extinction mechanism
- RS-232C output: 2 interface ports (for PC and plotter)
- Heater: Nichrome wire (1kW)
- Heater cooling system: Cooling fan (time settable)
- Condenser tube temperature: 0 - 60ﾟC by Peltier elements
- Power source: 100V AC, 50/60Hz, 20A (Supplied with with a transformer for local voltage)
- Dimensions: 460(W) x 510(D) x 750(H) mm, Net about 65kg
* To be supplied at the state of Complete Ready for Use
ADM-1CP_distillation.pdf
Automatic Reduced Pressure Distillation Tester
Model ADM-1RP
High performance reduced pressure distillation tester
Testing standards: ASTM D1160 & JIS K2254
<Specifications>
- Temperature range: 0 to 400ﾟC (thermometer JIS B7410 GUM49)
- Temperature accuracy: 0.1ﾟC (distillation temp., temp. in flask, condenser & chamber temp.)
- Pressure range: Less than 100mgHg (depending on vacuum pump capacity)
- Vacuum pump: Displacement 120L/min.
- Distillation rate: 6 to 8 mL/min.
- Data display: LCD, 40 characters x 8 lines, 12 program names, test condition, process monitoring
- Data output: Thermal graphic printer (110mm width), distillation status monitor
- Output: Report form, 1% data, distillation curve
- Test termination setting: Vol & Temp. selectable
- Safety features: Protect from pressure release operation, etc.
- RS-232C output: 2 interface ports (for PC and plotter)
- Heater: Nichrome wire (1kW)
- Heater cooling system: Cooling fan (time settable)
- Condenser tube temperature: Adjustment by warm water circulation from the built-in tank
- Power source: 100V AC, 50/60Hz, 10A+10A (Supplied with a transformer for local voltage)
- Dimensions: 600(W) x 520(D) x 880(H) mm, Net about 65kg (including vacuum pump)
* To be supplied at the state of Complete Ready for Use
ADM-1RP_distillation.pdf
