Hydraulic Extrusion Press of Xebex International, Ltd.

Hydraulic Extrusion Press
EP Series



Hydraulic type Extrusion Press
for molding with complicated structure

Features:
By applying the linearly uniform pressure to the molding dice, it makes it possible to make a mold even with such complicated structure as “Honeycomb” by this kind of Screw type extruder.

- This is a piston type extruder that is very suitable even to make a test piece mold as even a small amount of sample can be extruded.
- Its extruding speed can be easily changed by regulating the amount of oil to be fed to the pressure loading cylinder.
- Depending on the sizes of molds and characteristics of the sample material, the pressure to be loaded can be selected from 3, 10 or 75 tons, and the diameter of the material injector can be selected from 35, 50 or 100 (or 180) mm in diameter.

Model EP-3D
- Cylinder diameter: 35mm in diameter
- Pressure to be loaded: 3 ton (24.5kg/cm2)
- Needed power: 2.2kW/0.4kW
- Dimensions & weight: 200L x 100W x 275H cm, Net about 1,200kg

Model EP-10
- Cylinder diameter: 50mm in diameter
- Pressure to be loaded: 10 ton (57kg/cm2)
- Needed power: 3.7kW/0.4kW
- Dimensions & weight: 200L x 100W x 275H cm, Net about 1,200kg

Model EP-75
- Cylinder diameter: 100mm (or 180mm) in diameter
- Pressure to be loaded: 75 ton (197.5kg/cm2)
- Needed power: 11kW/0.4kW
- Dimensions & weight: 230L x 110W x 318H cm, Net about 2,000kg


Catalogue
Installation Drawing