HOME
Electro-chemical Analyzers
Industrial System
Heat Gradient Tester
Model No. 884
Used for determination of optimum temperature needed for heat sealing treatment for packaging and clothes, including measurement of heat sensitivity, etc.
- Temperature range: 50 to 250ﾟC
- Temperature accuracy: Set temperature +/-0.3%
- Temperature gradient: 0.1 to 49.9ﾟC
- Heat plate stroke: Approx. 20mm
- Seal size: 10 x 25mm (5 seals)
- Applied pressure: 0 to 0.4MPa (gauge pressure)
- Pressure applying duration: 0.5 to 99.9 sec. (in 0.1sec. steps)
- Heater capacity: 900W (150W x 6)
- Compressor air: Required (0.5Pa or more)
- Power supply: 100V AC, singple-phase, 10A (Supplied with 220/100V outer transformer)
- Dimensions & weight: 50(W) x 38(D) x 50(H) cm, Net about 70kg
Catalogue
Heat Deformation Testers
Model No. 533 Series
Used to evaluate plastic thermal properties regarding the ''Deflection temperature under load (DTUL)'', ''Vicat softening temperature (VST)'' and ''Ball pressure temperature''
Testing standards: ISO-75, ISO 306, IEC 335-1, JIS K7191, JIS K7206
No. 533 HDT Tester, Model 3M-2
- Sample holder: 3 holders
- Test temperature range: Room temp. up to 300ﾟC
- Test tank: Oil tank (approx. 16L)
- Heating rate: 120ﾟC/h, 50ﾟC/h (arbitraty setting by PC)
- Temperature distribution: +/-0.5ﾟC (near the sample)
- No. of temp. sensor: 4 Pt sensors
- Displacement measurement: Differential transformer, 1/1000mm indication, 0 to +/-2mm
- Stirrer: Parallel ciuculation system (propeller type)
- Cooling system: U-tube type heat exchanger (forced oil circulation, 200W motor)
- Test items: Flatwise test (DTUL), Edgewise test (DTUL/option), Vicat test & Ball pressure test (option)
- Power supply: 100V AC, single phase, 2.7kVA (Supplied with 220V down transformer)
- Dimensions & weight: 72(W) x 63(D) x 135(H) cm, Net approx. 150kg
No. 533 HDT Tester, Model 6M-2
- Sample holder: 6 holders
- Test tank: Oil tank (approx. 28L)
- No. of temp. sensor: 7 Pt sensors
- Power supply: 100V AC, single phase, 4.5kVA (Supplied with 220V down transformer)
- Dimensions & weight: 101(W) x 63(D) x 138(H) cm, Net approx. 180kg
- Other specifications are the same as those above.
* Some of Accessories in Option:
- Edgewise test option
- VICAT test option
- Ball pressure test
- Calibration kit
- Secondary cooling unit
Catalogue
